Antares 44
Official walkthrough of the earlier Antares 44i generation. Interior details and equipment may differ from current GT and Hybrid configurations.
About the Antares 44
The Antares 44 is a sailing catamaran designed for liveaboard cruising, with a raised saloon and a cockpit-linked helm. Its published dimensions are 13.6 m length overall, 6.6 m beam and 1.2 m draft.
The three-cabin layout connects the saloon, practical galley, cockpit and private accommodation for comfortable daily use. The galley includes counter space, a stove, oven, convection microwave, refrigerator and top-loading freezer.
The protected helm is integrated with the cockpit, supporting communication and movement while under way. Shaft drives and skegged rudders provide a conventional propulsion arrangement with added rudder protection.
The GT and optional Hybrid are two configurations of the Antares 44 platform. The GT uses conventional diesel shaft drives, while the Hybrid adds electric assist; CatamaranWorld can help buyers compare these choices with their intended cruising plans.
Testimonials
“The boat’s motion through the waves was stable and easy.”
In this historical Antares 44i review, George Day describes assured steering and an easy motion through chop off Gloucester. He notes that sail controls led back to the cockpit, keeping the boat’s working arrangements close at hand.
His account also highlights the care he saw in the Argentine builders’ workmanship. For life aboard, he points to a generous cockpit, useful storage, and accommodations arranged for a cruising couple or family.
“a protected helm tied into the cockpit”
As the manufacturer, Antares presents the current 44 with a protected helm connected to the cockpit and a raised salon with open sightlines. Its working galley, private cabins, and deep storage emphasize the practical flow of daily life aboard.
The three-cabin owner layout brings the cockpit, helm, and living spaces into a coherent plan. Buyers can consider the diesel-focused 44 GT or review the 44 Hybrid as a separate configuration path for greater electrical independence.
Model years & editions
Key milestones and configuration choices.
- 2004
PDQ foundation
The Canadian-built PDQ 44 established the platform from which the Antares 44 family developed.
- 2009
Argentine production
Production of the Antares 44 began at 40 Grados Sur in San Fernando, Argentina, following the transfer of the PDQ design and tooling.
- 2014
Grand Salon generation
The builder dates the 44 GS, or Grand Salon, generation to 2014, with a revised interior and more usable living space.
- 2019
Grand Touring generation
The builder identifies 2019 as the introduction of the 44 GT, or Grand Touring, with further systems, interior and deck refinements.
Antares 44 FAQs
What are the Antares 44’s published dimensions?
The current Antares model page lists a 44 ft overall length, 21 ft 9 in beam and 4 ft draft. Its metric overall length conflicts with that imperial figure, so buyers should confirm the dimensional drawing for the particular boat before arranging a berth or transport.
How is the Antares 44 laid out?
The current owner layout has three cabins, a raised saloon and a galley down in the hull. The protected helm connects with the cockpit, while the interior photographs show queen berths in the owner and aft guest cabins and alternative forward guest arrangements.
What is the difference between the 44 GT and 44 Hybrid?
They are configuration paths on the same Antares 44 platform. GT uses conventional diesel shaft propulsion; the optional Hybrid adds electric drive capability and a different battery, charging and monitoring package.
How much fuel and fresh water does the current 44 carry?
Antares currently publishes 120 US gallons of fuel and 150 US gallons of fresh water for the 44. Earlier boats, refits and other published specifications differ, so tankage should be checked against the individual vessel’s documents.
Does the Antares 44 use saildrives?
The current model specification lists shaft drives and skegged rudders. It also lists two 40 hp Yanmar diesels for the conventional auxiliary installation; hybrid equipment should be confirmed for the selected package.
Are 44i, GS and GT separate sizes?
These names identify generations of the Antares 44 family. The 44i continued the PDQ-derived platform in Argentina, GS means Grand Salon, and GT means Grand Touring; specifications and fitted equipment should remain tied to the individual generation and boat.
Is the Tall Rig fitted to every Antares 44?
No. Antares presents Tall Rig as an option and recommends reviewing the intended cruising region, wind range, sail-handling preferences and load assumptions before selecting it.
Is hybrid propulsion standard on the Antares 44?
No. The manufacturer presents hybrid as an optional factory configuration and currently describes Hybrid Marine Parallel Hybrid and Integrel Hybrid E-Drive paths. Their engines, motors, integration and regeneration capabilities differ, so the selected package needs its own equipment schedule.
Considering an Antares 44?
Talk through layouts, equipment, ownership costs and your cruising plans with a dedicated catamaran specialist.


